Description 250kW Weichai LNG CNG Gas Genset HTG-250GF
NEW 250kW Weichai LNG CNG Natural Methane Gas Generator Set HTG-250GF 
Fuel Types Biogas, methane gas.
Standby Power kVA/kW 316/253
Prime Power kVA/kW 312.5/250
Rated speed r/min 1500
Engine Model Weichai WP13D317E300NG 288
This series generator sets choose high quality natural gas Weichai engine assembled with alternators (Stamford, Faraday or other famous brand), the control system adopts PLC automatic controller. This series of natural gas generator can be used in natural gas power plant, school, hospital, oil field and others, as a 24-hour uninterrupted power or standby power.
All Weichai engines are built with the best technology and components.
Weichai engines are ISO 9001: 2008 certified; which demonstrates its commitment to quality under European standards.
Advantages of LNG CNG Natural Methane Gas Generator Set
- High efficiency and Cost effective
- Low Emissions due to advantage technologies
- Low space requirement due to compact design
- Reliable service life resulting from application-specific design
- Powerful to ensure uninterrupted operation
- Adapt to harsh conditions
- Applications of LNG CNG Natural Methane Gas Generator Set
- Fuel Types CNG, LNG, PNG, Oilfield Associated Gas,Coalmine Gas, Coalbed Gas, methane gas.
Control PanelThe DSE7310 is an Auto Start Control Module and the DSE7320 is an Auto
Mains (Utility) Failure Control Module suitable for a wide variety of single,
diesel or gas, gen-set applications
Attachment (Optional Parts)
20ft Container canopy Scientific and efficient Special sand-proof waterproof blinds with illumination.
Soundproof Canopy (Super Silent canopy)Containerized Canopy
CHP system (Exhaust Heat Collector)1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/m·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs
are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the
heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange,
no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.
Automatic Paralleling and Gridconnect Control SystemThis system can connect generator sets in parallel or connect the generator set to the grid automatically.
CHP/Cogeneration/CCHP/Trigeneration
Remote Control
PMG Alternator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)
Generator Supply Scope:1) High Performance Gas Engine.
2)Brushless Alternator With AVR .
3) Digital Control Cabinet .
4) Weather-proof Cabinet, Steel Base Frame With Shock Absorber.
5) High performance Gas Pressure Regulator .
6) Advanced Ignition System.
7) IMPCO Air-Fuel Mixer
8) Stable Electronic Speed Governor.
9) High Performance Flame Arrester.
10) Safely Explosion-proof System.
11) MCCB, Radiator Fan, Muffler, Air Filter.
12) 2*12V Non-Maintenance Start Batteries.
13) Installation Accessories, Tool Kit & Manual Books.
Remarks: Both 50Hz and 60Hz are available.
Special voltages available.
Alternator brand Stamford,Leroy Somer, Marathon are optional.
Controller brand Deepsea,Comap are optional.
Special requirements for Soundproof Canopy, ATS, Parallel & Synchronization Control, CHP and Biogas Pre-treatment Machinery are optional
The specification of the 250kW Weichai LNG CNG Gas Genset HTG-250GF
Model HTG-250GF
Rated current 450A
Rated power 250kW/312.5kVA
Standby power 275kW/343.5kVA
Controller Auto PLC controller
Rated voltage 380V/220V
Power factor 0.8
Engine Technical Parameters
Engine Model Weichai Power/WP13D317E300NG
Rated Power 250kW
Engine Type In-line, Four Stroke, Electronic Ignition,water cooled
Cylinder No. 6 in line
Bore ×Stroke 126×165mm
Displacement 12.53L
Start Method Electric
Crankshaft Rotation Direction Inverse Hour (From Flywheel)
Cooling Method Closed Water Cooling
Aspiration Type Turbo charged and inter cooled
Speed Governor Electronic
Gas Mixer Formation Pre-Mix
Rated Gas Consumption (m³/Kw·h)
100% loads 70m3/h
75% loads 56.3m3/h
50% loads 40m3/h
Lubricating oil Temperature ＜80℃
Lubricating oil capacity 26L
Lubricating oil Pressure 345-483 Kpa
Max -exhaust Temperature 600℃ +-25
Ambient temp（°C） -10～40（If ＜-10，oil and water heating; If ＞40，power correction）
Altitude(m) ≤1000
Fuel Pipeline natural gas；MN≥85
Gas supply pressure(kPa) Max. inlet 50 (Special pressure, contact with company)
Steady-state voltage deviation ≤+-2.5%
Transient voltage deviation（100%sudden power decrease/increase） +25%～-20%
Voltage steady time(s) 2
Steady-state frequency band ≤1.5%
Transient frequency deviation from rated
frequency (100% sudden power
decrease/increase) +-18%
Frequency steady time(s) 15
Weichai WP13NG series, 6 cylinder, in-line 4
stroke, radiator cooled engine
Well-designed air handling system with
- Air cleaner
- Replaceable paper element air cleaner with
restriction indicator
- Optimized turbocharger for increased altitude
capabilities
- High efficiency, large heat area intercooler,
reduce the air temperature after the intercooler
First fill of lube oil and coolant
NG gas regulator
NG gas filter
Standard integral set-mounted radiator system,
designed and tested for 40°C ambient temperature
Electrical starter motor with soft start engagement
feature
Intelligent fuel injection technology to start fast
guarantee
Battery charging alternator
24 V DC batteries
Alternator Technical Parameters
Alternator Model Faraday/FD4M Insulation class Class H
Rated Power 250kW/312.5kVA
Connection 3-pahse, 4-wire
Standby power 275kW/343.5kVA
Cooling Air cooled
Power factor 0.8
Protection Class IP23
Excitation Type Brushless
Voltage Regulation Mode AVR (Automatic)
Usage: Make Electrical;
Phase: Three Phase.
Certificate: Has passed CE, ISO9001: 2008
Export Markets: Global
Insulation class: H
Electrical performance
Voltage setting range： ≥+-5%
Steady - state frequency regulation ≤5%
Steady-state voltage regulation： ≤+-1%
Frequency fluctuation rate ≤1.5%
Transient voltage deviation (100% Sudden power reduction) ≤+25%
Transient frequency deviation (100% Sudden power reduction) ≤+12%
Transient voltage deviation (Sudden power plus) ≤-20%
Transient frequency deviation(Sudden power plus) ≤-10%
Voltage stabilization time (100%Sudden power reduction) ≤6S
Frequency recovery time (100%Sudden power reduction) ≤5S
Voltage stabilization time (Sudden power plus) ≤6S
Frequency recovery time(Sudden power plus) ≤5S
42987 view
12 months or 1500 running hours (subject to the earlier)
We can produce any quantity of machines for you in the shortest possible time at the lowest price on the market.
Copy page link
ADD TO CART 
Get Best Price 
.jpg "HOT PRICE for Avatr 11")
My Cart